Buy Now

Product Overview

Watch Now
+

Use With

  • Shake Flask
  • Bioreactor Microvessel
  • Custom Bioreactor

Product Specification Sheet

COMING SOON

ID Fiber Optic Probe

Tired of needing a different probe to measure every culture condition within your bioreactor? Frustrated with finicky equipment that requires repeated recalibrations?

Tired of needing a different probe to measure every culture condition within your bioreactor? Frustrated with finicky equipment that requires repeated recalibrations?

Designed to fit a standard bioreactor port, the ID·Fiber Optic Probe has three individual channels sized to fit SBI’s ID·Fiber Optic Cables. Single-use, disposable, and preloaded with optical sensors for pH and DO, you’ll never have to worry about sensor maintenance again. Use two ID·Fiber Optic Cables to measure pH and DO and insert a temperature probe of your choice into the third channel. By incorporating sensing of three conditions into one unit, the ID·Fiber Optic Probe is an easy to use, minimally invasive alternative to standard pH and dissolved oxygen measurement devices.

Features

Just getting started? CONFIGURE YOUR KIT.
NEED A REPLACEMENT? ORDER NOW.
Requires an ID∙Fiber Optic Kit.

Use With

  • Shake Flask
  • Bioreactor Microvessel
  • Custom Bioreactor

Product Specification Sheet

COMING SOON

Product Overview

Watch Now
+
pH and DO – Set of 5
  • Includes ID·Sensors pH and DO
Description

How to set up the ID • Fiber Optic Kit with the ID • Fiber Optic Probe Accessory

The ID • Fiber Optic Probe is designed to thread into bioreactor culture systems and has three interior channels for taking pH, DO, and temperature measurements. The channels are sized to fit the fiber optic cables, as well as a standard probe thermometer.

  1. Install ID • Data Hub software onto your computer.
  2. Plug USB cable from ID • Converter into your computer.
  3. Plug cable from ID • Fiber Optic Reader into
    ID • Converter and place reader near the culture vessel.
  4. Thread the ID • Fiber Optic Probe into a port on the culture vessel.
  5. Remove the cap from the ID • Fiber Optic Probe and feed the fiber optic cables into the probe channels with preloaded ID • Sensors pH and DO. Note which cable (A or B) corresponds to which sensor type (pH or DO).
  6. Insert a customer-provided thermometer into the ID • Fiber Optic Probe’s third channel (optional).
  7. Ensure the cable ends are flush with the bottom of each channel.
  8. Ensure the ID • Sensor pH is completely submerged in liquid as the sensor must be completely saturated to return accurate readings.
Use the ID • Fiber Optic Probe in the following systems:
  • Small to large scale commercial bioreactors
  • Shake flasks
  • Custom bioreactors

    What size port does the
    ID • Fiber Optic Probe fit?

    The ID·Fiber Optic Probe fits in a standard bioreactor port through a PG13.5 thread connection.

    Do I have to calibrate the probe prior to use?

    Nope! Because the probe is designed to house SBI’s fiber optic cables and comes preloaded with ID • Sensors, you just insert the probe into your bioreactor and you’re ready to go.

    Where are the sensors? Do I need to place them myself?

    The ID • Fiber Optic Probe comes with ID • Sensors for both pH and DO already attached to the end of the probe that will interact with the culture media. Each sensor is aligned to one of the three available channels, leaving an extra channel for temperature measurements.

    Can I reuse the probe and sensors?

    The ID • Fiber Optic Probe and ID • Sensors are designed to be single use.
    VIDEOS

    IDFiber Optic Kit Overview

    IDFiber Optic Accessories Overview

    Specifications

    pHDO
    SensorsPreloaded 3mm diameter
    Sterilization Autoclave: 10min, 121°C
    PerformanceSingle-use

    Recyclable
    Material Biocompatible polycarbonate
    ThreadPG13.5
    Length120mm from bottom of threading to end of probe
    Includes3mm diameter x 12mm interior diameter Silicone O-Ring

    PRICING

    ID • Fiber Optic Probe – pH and DO, Set of 5

    Includes ID·Sensors pH and DO
    $175
    Buy in conjunction with the ID • Fiber Optic Kit!

    Need Help Choosing the Right Product?

    We manufacture and distribute a range of cutting-edge optical sensors and desktop production
    systems to help you recognize and reduce failures earlier in the process — so that you can
    discover and create more effective therapies faster.
    Additional Information
    Weight .19 lbs
    Dimensions 5 × 8 × 1 in

    Account

    Registered Customers

    If you have an account with us please log in.

    Your Cart

    Subtotal $0