Just getting started? CONFIGURE YOUR KIT.
ID Flow Through Cell
Interested in knowing pH or DO levels within your perfusion lines?
Interested in knowing pH or DO levels within your perfusion lines?
The ID∙Flow Through Cell is designed to connect directly into your flow loop, enabling you to measure pH and DO while your experimental run is active. Single-use, disposable, and preloaded with SBI’s ID·Sensors, the ID∙Flow Through Cell is the perfect way to collect reliable, real-time data of your culture conditions anywhere in a perfusion flow loop. Connect the ID∙Flow Through Cell into your flow loop with Luer fittings and insert a ID • Fiber Optic Cable into the housing. Select a single unit if you’re interested in measuring only pH or DO or a dual unit to measure both pH and DO simultaneously.
Features
- Connects into a flow loop
- Single use
- Single units equipped with either ID·Sensor pH or DO
- Disposable
- Dual units equipped with both ID·Sensors pH and DO
- Compatible with low perfusion flow rates
NEED A REPLACEMENT? ORDER NOW.
Requires an ID∙Fiber Optic Kit.
Use With
-
Shake Flask
-
Bioreactor Microvessel
-
Custom Bioreactor
Product Specification Sheet
COMING SOON
Product Overview
ID Flow Through Cell
$250
Single pH, Set of 5
- Includes ID·Sensor pH
Single DO, Set of 5
- Includes ID·Sensor DO
Dual pH and DO, Set of 5
- Includes ID·Sensors pH and DO
Description
How to set up the ID • Fiber Optic Kit with the ID • Flow Through Cell Accessory
The ID • Flow Through Cell is designed to connect into a perfusion loop and is available as a single or dual unit. The single unit comes preloaded with either an ID • Sensor pH or an ID • Sensor DO while the dual unit comes preloaded with ID • Sensors for both pH and DO. The ID·Flow Through Cells connect to your perfusion flow loop through Luer fittings.
- Install ID • Data Hub software onto your computer.
- Plug USB cable from
ID • Converter into your computer. - Plug cable from
ID • Fiber Optic Reader into ID • Converter and place reader near the culture system. - Loosen the end nut on the ID • Flow Through Cell and feed a fiber optic cable into the top of the ID • Flow Through Cell.
- Repeat Step 4 with a second fiber optic cable if using an ID • Flow Through Cell – Dual unit.
- Ensure the cable end is flush with the bottom of the ID • Flow Through Cell and tighten the nut.
- Connect the ID • Flow Through Cell into flow loop with Luer fittings.
- Repeat steps for additional ID • Flow Through Cells.
Use the ID • Flow Through Cell in the following systems:
Use the ID • Fiber Optic Probe in the following systems:- Tissue culture perfusion bioreactors
- Microfluidics devices
- Bioprocessing bioreactors
- Organ perfusion chambers
What size tubing does the ID • Flow Through Cell fit?
The Luer fittings on the ID • Flow Through Cell have a 3 mm flow ID, and 3 mm diameter tubing is recommended for optimal readings.
Can I reuse the ID • Flow Through Cells?
The ID • Flow Through Cells and ID • Sensors are designed to be single use.
Where are the sensors? Do I need to place them myself?
The ID • Flow Through Cells have the ID • Sensors already attached within the pipe portion of the units. The sensors are aligned to the channel that secures the fiber optic cable in place.
Specifications
| pH | DO | |
| Sensors | Preloaded 3mm diameter | |
| Sterilization | Autoclave: 10min, 121°C | |
| Performance | Single-use Recyclable |
|
| Material | Biocompatible polycarbonate | |
| Size | 3mm interior diameter Luer Lock | |
VIDEOS
ID ▪ Flow Through Cell Overview
ID ▪ Flow Through Cell Set Up
PRICING
ID • Flow Through Cell Single – DO, Set of 5
Includes ID·Sensor DO
$250
ID • Flow Through Cell Single – pH, Set of 5
Includes ID·Sensor pH
$250
ID • Flow Through Cell Dual – pH and DO, Set of 5
Includes ID·Sensors pH and DO
$350
Buy in conjunction with the ID •
Fiber Optic Kit!
Additional Information
| Weight | 0.05 lbs |
|---|---|
| Dimensions | 5 × 8 × 1 in |